Mountain Equipment Mens Tupilak Jacket

Weight: 500gFeatures Ideal for Ice & Mixed Climbing, Alpine Climbing and Mountaineering Minimalist and rugged design built for efficient movement and protection Using their classic ‘Alpine Fit’ for complete freedom of movement without excess fabric. Sized to be worn as part of a layering system. The Tupilak has a slightly narrower hem and marginally shorter length when compared with, for example, the Lhotse Jacket, making it a little closer fitting and better suited to steep climbing Storm Construction - our highest specification construction for weather resistance and durability Technical tailoring around the arms enables arm lift, preventing the lower hem from rising whilst reaching high during climbs Laminated and bonded hanging loop below the rear hood 2-way YKK® WR underarm pit zips with laminated and bonded entry  Super Alpine Helmet Compatible (HC) Hood is fully adjustable with rear/lateral volume adjustment, two frontal adjusters and internal helmet-gripping silicone strips Laminated and wired hood visor maintains field of vision even in high winds or when wearing glasses/goggles Seamless face panel is cut to shield from freezing winds and spin drift whilst remaining comfortable and unrestrictive Internal rear hood adjuster cord channels with rollaway clip Internal Cohaesive® cord locks and cord tunnel Two large volume outer chest pockets with YKK® AquaGuard® zips, positioned to be accessible when carrying a pack or wearing a climbing harness and large enough to store gloves, etc YKK® #5 AquaGuard® pocket zips with internal storm flap, drainage channel and zip garages Ergonomic zip pullers make use easier when wearing gloves or mitts Fully laminated pocket construction with waterproof pocket bags Single inner zipped security pocket for storage of small items Other Features Full-length 2-way YKK® AquaGuard® #5 centre front zip with laser cut internal storm flap Press stud fastener system at the hem allows venting through an open front zip whilst ensuring the jacket is secured to the body Ergonomic zip pullers make use easier when wearing gloves or mitts Roll over chinguard lined with brushed fine microfleece for comfort next to the mouth and chin Articulated and pre-shaped sleeves for ease of high arm movement during climbing Velcro adjustable and bonded cuffs for a comfortable and reliable close fit around wrists or over gloves/mitts with ease. Internal dual tether hem drawcords to fit the body and minimise heat loss. Bar tack reinforcement on the pull tab Bonded hem Mountain Equipment reflective logo detailing on the front chest, right upper arm and centre back Main fabric made by W. L. Gore & Associates in China. Designed and developed in the UK. Built to last. Backed up by Mountain Equipment's Product Lifetime Guarantee Materials Waterproof, Windproof & Breathable: GORE-TEX Pro 80D fabric is guaranteed to keep you dry Main Fabric: 3-layer GORE-TEX Pro 80D fabric with ePE membrane and a PFAS-free DWR. 13mm taped seams throughout to prevent water entry

Mountain Equipment Mens Makalu Jacket

Weight: 550g Features New GORE-TEX with ePE membrane and FC free DWR 3-Layer construction with 75D face fabric for durability Mountain HC Hood is fully adjustable Alpine fit with articulated and pre-shaped sleeves 2 large pockets with YKK® WR zips Napoleon chest pocket with YKK® WR zip 2-way YKK® moulded Aquaguard® centre front zip 2-way YKK® WR underarm pit zips Adjustable laminated cuffs and dual tether hem drawcords Laminated and laser cut inner pocket with YKK® zip CONSTRUCTION GORE-TEX Rain Test Certified 13mm taped seams to prevent water entry Internal centre-front storm guard with fastener Laminated and bonded hanging loop MATERIALS GORE-TEX 3-Layer 75D / 170gsm (Shoulders, Rear Hem & Upper Sleeve) GORE-TEX 3-Layer 50D / 149gsm (Main Body & Hood) 100% Polyester Face, ePE membrane with solution dyed Tricot backer POCKETS Waterproof pocket construction Laser cut and laminated inner pocket HOOD Mountain HC Hood Laminated and wired visor Internal hood adjuster cord channels Nifco cord locks Tricot lined face panel Rollaway hood tab CUFFS & SLEEVES Pre-shaped and articulated sleeves for greater freedom of movement when reaching up / climbing Shaped cuff improves wearability Laminated cuff tab with Velcro Bar Tack Reinforcement – aids directional pull and wont tear off HEM Sewn hem / Adjustable Dual-tether hem drawcords wont snag Nifco Cord Locks ZIPS Centre Front - YKK® Aquaguard® #5 VISLON® zipper with 2-Way non-locking slider and Plastic Head Pockets - YKK® Aquaguard® #3 Coil zipper non-locking slider with metal head Inner Pocket - YKK® #3 Reversed Coil zipper non-locking slider Pit Zips - YKK® #3 Reversed Coil zipper non-locking slider with metal head PERFORMANCE Hydrostatic Head: 28,000mm Breathability: RET - 9m2Pa/W

Mountain Equipment Mens Kedar Jacket

Features 3-layer GORE-TEX Active 30D fabric for superior breathability and waterproofing Fully adjustable Mountain Hood that rolls away when not needed Alpine fit with pre-shaped, articulated sleeves for easy movement YKK® WR centre front zip for reliable water resistance Two large ventilated pockets with weather-resistant zips YKK® WR underarm pit zips for fast, on-the-go ventilation Adjustable laminated cuffs and dual tether hem drawcords for a tailored fit Lightweight and packable — ideal for fast-paced mountain adventures  

Sprayway Mens Torridon Jacket

Weight: 640gFeatures 3-layer GORE-TEX 75D PFCec FREE recycled polyester plain weave fabric offers high levels of protection Grown on fully adjustable Hill Hood with a wired peak and roll away tab feature 2-way YKK® centre front zip with double storm guard 2 zipped hand pockets with map shelf 1 inner zipped stretch softshell pocket 1 inner stretch mesh elastane bound stash pocket 2-way pit zips Concealed drawcord waist adjustment Adjustable cuffs Adjustable split hem drawcords Composition 100% recycled polyester PTFE membrane

Mountain Equipment Mens Lhotse Jacket

Weight: 500g Features: Materials Waterproof, windproof and breathable; next gen GORE-TEX with ePE membrane is guaranteed to keep you dry A lighter weight main body fabric keeps the jacket supple and comfortable to wear, and a heavier weight material is used on the yoke and shoulders for greater durability. Main Fabric: 40D GORE-TEX Pro (117gsm). Waterproof breathable 3-layer construction with Gore DWR. HH: 28,000mm, RET: <7 Reinforcements: 80D GORE-TEX Pro (154gsm). Waterproof breathable 3-layer construction with Gore DWR. HH: 28,000mm, RET: <7 Taped seams throughout to prevent water entry Solution dyed backer Patterning & Design Using our classic ‘Alpine Fit’ for complete freedom of movement without excess fabric The Lhotse is sized on the assumption that at some point you may need to wear a baselayer, lightweight fleece  other mid-layers underneath it, so worn over just a tee-shirt in summer it may feel a little generous. That said, most people find this ‘true to size’ no matter when or with what they use it, but if you are of slight build and intend to wear only thin layers underneath it then you may need to consider dropping down a size Storm Construction - our highest specification construction for weather resistance and durability Hood Configuration Our Mountain Helmet Compatible Hood can also be worn comfortably over a helmet when required Hood is fully adjustable with rear volume adjustment and two frontal adjusters Laminated and wired hood visor maintains field of vision even in high winds or when wearing glasses or goggles Internal rear hood adjuster cord channels Seamless face panel with shell fabric facing Internal Cohaesive® cord locks and cord tunnel Rollaway hood tab Pocket Configuration 2 outer hand pockets with YKK® AquaGuard® zips with internal stormflaps, drainage channels and zip garages, positioned to be accessible when carrying a pack or wearing a climbing harness and large enough to store gloves and other items 1 outer chest pocket with YKK® AquaGuard® zip with internal stormflap, drainage channel and zip garage, large enough to accommodate a map, GPS or other accessories Single inner YKK® zipped security pocket for storage of small items Fully laminated waterproof pocket construction Stratum pocket construction increases pockets' internal volume Centre Front Zip Full length 2-way YKK® AquaGuard® centre front zip with laser cut internal stormflap Cuffs & Sleeves Configuration Articulated and pre-shaped sleeves are shaped for movement and are comfortable even when reaching up or using trekking poles Adjustable and bonded cuffs Bar tack reinforcement on cuff pull tabs Waist & Hem Construction Bonded hem for durability Internal dual tether hem drawcords Further Features Underarm pit zips allow for airflow & ventilation when required Built to last. Backed up by our Manufacturers Lifetime Guarantee

Mountain Equipment Mens Makalu Jacket

Weight: 550g Features New GORE-TEX with ePE membrane and FC free DWR 3-Layer construction with 75D face fabric for durability Mountain HC Hood is fully adjustable Alpine fit with articulated and pre-shaped sleeves 2 large pockets with YKK® WR zips Napoleon chest pocket with YKK® WR zip 2-way YKK® moulded Aquaguard® centre front zip 2-way YKK® WR underarm pit zips Adjustable laminated cuffs and dual tether hem drawcords Laminated and laser cut inner pocket with YKK® zip CONSTRUCTION GORE-TEX Rain Test Certified 13mm taped seams to prevent water entry Internal centre-front storm guard with fastener Laminated and bonded hanging loop MATERIALS GORE-TEX 3-Layer 75D / 170gsm (Shoulders, Rear Hem & Upper Sleeve) GORE-TEX 3-Layer 50D / 149gsm (Main Body & Hood) 100% Polyester Face, ePE membrane with solution dyed Tricot backer POCKETS Waterproof pocket construction Laser cut and laminated inner pocket HOOD Mountain HC Hood Laminated and wired visor Internal hood adjuster cord channels Nifco cord locks Tricot lined face panel Rollaway hood tab CUFFS & SLEEVES Pre-shaped and articulated sleeves for greater freedom of movement when reaching up / climbing Shaped cuff improves wearability Laminated cuff tab with Velcro Bar Tack Reinforcement – aids directional pull and wont tear off HEM Sewn hem / Adjustable Dual-tether hem drawcords wont snag Nifco Cord Locks ZIPS Centre Front - YKK® Aquaguard® #5 VISLON® zipper with 2-Way non-locking slider and Plastic Head Pockets - YKK® Aquaguard® #3 Coil zipper non-locking slider with metal head Inner Pocket - YKK® #3 Reversed Coil zipper non-locking slider Pit Zips - YKK® #3 Reversed Coil zipper non-locking slider with metal head PERFORMANCE Hydrostatic Head: 28,000mm Breathability: RET - 9m2Pa/W