Carhartt Mens Monterey Jacket

Features Loose Fit Jackets: Built for those who want extra room to move, this true loose-fit outer garment features intentional ease through the chest, shoulders, and body, allowing for comfortable layering over hoodies, sweats, and bodywarmers Wind Fighter™ - Wind resistant Storm Defender™ - Waterproof breathable laminated membrane Attached three-piece hood with adjustable hem and hidden draw cord Long Sleeve Chest pocket with zipper closure Two lower front pockets with zipper closure Packable into the wearer's left zippered lower pocket Anorak packable in zipper secure pocket Interior pocket with hook-and-loop closure Water-repellent centre front half zipper with inside storm flap and chin protector Partial elastic cuff with hook and loop closure for additional adjustment Drop-tail hem for added coverage with adjustable draw cord Fully taped waterproof seams Carhartt label sewn on pocket 4.2 oz/yd² - 142 gsm WPB 2.5-Layer Taslan Rockford Material 100% Nylon

Regatta Mens Freesdale

Features Waterproof breathable ISOTEX 30000 recycled 100% polyester stretch ripstop fabric Breathability rating 30,000 g/m²/24 hours Durable water repellent finish Taped seams for complete waterproof protection Grown on technical wire peaked hood with adjusters Centre front zip with drainage channel Inner zipped security pocket 2 lower pockets & 2 chest pockets Adjustable cuffs Adjustable shockcord hem 3 Layer Fabric Made with recycled content Technology Isotex Stretch: Waterproof, breathable and windproof stretch fabric ISOTEX Stretch 30,000: Waterproof, breathable, windproof, with active stretch, 30,000mm hydrostatic head, and durable water-repellent finish.  Fabric 70% Polyester; 30% Recycled Polyester

Regatta Mens Freesdale

Features Waterproof breathable ISOTEX 30000 recycled 100% polyester stretch ripstop fabric Breathability rating 30,000 g/m²/24 hours Durable water repellent finish Taped seams for complete waterproof protection Grown on technical wire peaked hood with adjusters Centre front zip with drainage channel Inner zipped security pocket 2 lower pockets & 2 chest pockets Adjustable cuffs Adjustable shockcord hem 3 Layer Fabric Made with recycled content Technology Isotex Stretch: Waterproof, breathable and windproof stretch fabric ISOTEX Stretch 30,000: Waterproof, breathable, windproof, with active stretch, 30,000mm hydrostatic head, and durable water-repellent finish.  Fabric 70% Polyester; 30% Recycled Polyester

Regatta Mens Oklarna

Features Waterproof breathable ISOTEX 30000 61% polyester/39% recycled polyester stretch Ripstop fabric - 110 gsm Breathability rating 30,000 g/m²/24 hours Durable water repellent finish Taped seams for complete waterproof protection Part mesh, part recycled polyester taffeta lining Grown on technical hood with adjusters Inner zipped pocket Water repellent centre front zip with inner zip guard & drainage channel 2 lower pockets with water repellent zips Underarm ventilation zips with mesh lining Adjustable cuffs Adjustable shock cord hem Fabric 61% Polyester; 39% Recycled Polyester

Regatta Mens Oklarna

Features Waterproof breathable ISOTEX 30000 61% polyester/39% recycled polyester stretch Ripstop fabric - 110 gsm Breathability rating 30,000 g/m²/24 hours Durable water repellent finish Taped seams for complete waterproof protection Part mesh, part recycled polyester taffeta lining Grown on technical hood with adjusters Inner zipped pocket Water repellent centre front zip with inner zip guard & drainage channel 2 lower pockets with water repellent zips Underarm ventilation zips with mesh lining Adjustable cuffs Adjustable shock cord hem Fabric 61% Polyester; 39% Recycled Polyester  

Berghaus Mens Deluge Pro 3.0 Jacket

Features Berghaus Hydroshell® fabric is waterproof and breathable, keeping the wet from comng in and the sweat vapour out. Two zipped hand pockets are ideal for keeping snacks and other essentials safe and within easy reach. Fixed hood with single point adjustment so you can adapt to suit. Half elasticated cuffs and drawcord adjustment at the hem so you can adjust for comfort on the move. Material and Construction Fabric: 100% Polyester With Polyurethane Membrane Hydroshell® - Waterproof. Breathable. Lightweight. And really, really comfortable. Centre Back Length - 79cm Hydrostatic Head - 11,880mm Breathability Rating - 20,641 g/m2/24hrs

The North Face Mens Valley View Jacket

Features Attached, adjustable hood Centre front zip Vertical zipped chest pockets Secure-zip hand pockets Zipped underarm vents Internal hem adjuster Adjustable hook-and-loop cuffs Intended Use: Hiking Other Features Windproof: This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Breathable: Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer.  Recycled material: This product is made with recycled materials, which helps to reduce landfill waste and minimise its impact on nature. Waterproof: This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Standard fit: This garment is true to size for an easy, comfortable fit. Fabric and Construction Fabric - Body: 165 G/M², DryVent™ 3L—85% Recycled Polyester, 15% Nylon with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish Fabric - Hood, Collar & Draft Flap Lining: 111 G/M², DryVent™ 2L—100% Recycled Nylon with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish DRYVENT™: Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable.

The North Face Mens Quest Mono Jacket

Features Mesh body lining Brushed-knit back-neck and chin guard lining Exposed centre front zip Three-piece hood with one-point regulation Two zipped hand pockets Adjustable hood and hem Elasticated cuffs Heat transfer logo Intended Use: Hiking Standard fit: This garment is true to size for an easy, comfortable fit. Other Features DWR - Water repellent: A durable water-repellent finish provides protection from light moisture and fabric saturation. Waterproof: This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Breathable: Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer.  Fabric and Technology Fabric: 100% Polyester / Woven / Dobby Standard fit: This garment is true to size for an easy, comfortable fit DRYVENT™: Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable

The North Face Mens Dryvent Zip In Jacket

Features Internal hem cinch-cord  Compatible with other garments  Attached, adjustable three-piece hood  Centre front zip  Pit-zip venting  Zipped hand pockets  Adjustable hook-and-loop cuff tabs Heat transfer logos  Chin guard  Internal draft flap Other Features Waterproof: This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Windproof: This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill.  Breathable: Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer.  Recycled material: This product is made with recycled materials. Compatible with other garments: This product can be teamed with complementary products for complete weather protection. Materials and Construction Fabric - Body | 122 G/M², DryVent™ 2L—100% Recycled Polyester with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish  Fabric - Lining | 78 G/M², WindWall™—100% Recycled Polyester with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish  Compatibility | This jacket is compatible with the men's Glacier Fleece Jacket and Gilet), the men's Classic Down and Aconcagua Jackets, and the men's Glacier Heavyweight Fleece 

The North Face Mens Dryvent Zip In Jacket

Features Internal hem cinch-cord  Compatible with other garments  Attached, adjustable three-piece hood  Centre front zip  Pit-zip venting  Zipped hand pockets  Adjustable hook-and-loop cuff tabs Heat transfer logos  Chin guard  Internal draft flap Other Features Waterproof: This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Windproof: This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill.  Breathable: Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer.  Recycled material: This product is made with recycled materials. Compatible with other garments: This product can be teamed with complementary products for complete weather protection. Materials and Construction Fabric - Body | 122 G/M², DryVent™ 2L—100% Recycled Polyester with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish  Fabric - Lining | 78 G/M², WindWall™—100% Recycled Polyester with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish  Compatibility | This jacket is compatible with the men's Glacier Fleece Jacket and Gilet), the men's Classic Down and Aconcagua Jackets, and the men's Glacier Heavyweight Fleece

The North Face Mens Millerton Insulated Jacket

Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Synthetic fill - Synthetic insulation maintains warmth even in damp conditions. Breathable - Air can easily pass through the fabric in this garment, helping to regulate body temperature. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Synthetic insulated version of our popular Millerton Jacket Adjustable hood with stiffened peak Aadjustable hem Internal chest pocket and hook-and-loop adjustable cuffs Bluesign approved Materials Fabric | DryVent™ 2L–100% Polyester / Woven Centreback | 76,2 cm 

The North Face Mens Millerton Insulated Jacket

Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Synthetic fill - Synthetic insulation maintains warmth even in damp conditions. Breathable - Air can easily pass through the fabric in this garment, helping to regulate body temperature. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Synthetic insulated version of our popular Millerton Jacket Adjustable hood with stiffened peak Aadjustable hem Internal chest pocket and hook-and-loop adjustable cuffs Bluesign approved Materials Fabric | DryVent™ 2L–100% Polyester / Woven Centreback | 76,2 cm 

Mammut Mens Alto Guide HS Hooded Jacket

Weight: 480 gFeatures 3-layer Mammut DRY Tour laminate for dependable weather protection 100% recycled nylon face fabric Helmet-compatible 1-way adjustable hood with reinforced peak Water-repellent 2-way front zipper Zippered chest pocket 2 backpack and climbing-harness-compatible zipper pockets Underarm zipper for additional ventilation Pre-shaped sleeves with hook and loop fastener Hem width can be adjusted with drawstring Water column: 20000 mm Breathability: 20.000 g/m²/24h Material and Construction Denier (main material): 40Dx40D Main Fabric 1 (B2B): 3L Mammut DRY Tour Backing (B2B): 100% polyester Lining 1 - Face Material (B2B): 100% recycledPolyester Membrane (B2B): 100% polyurethane Main Fabric 1 - Face Material (B2B): 100% polyamide (recycled) Fair Wear bluesign® PRODUCT PFC-free DWR Recycled

The North Face Mens Quest Mono Jacket

Features Mesh body lining Brushed-knit back-neck and chin guard lining Exposed centre front zip Three-piece hood with one-point regulation Two zipped hand pockets Adjustable hood and hem Elasticated cuffs Heat transfer logo Intended Use: Hiking Standard fit: This garment is true to size for an easy, comfortable fit. Other Features DWR - Water repellent: A durable water-repellent finish provides protection from light moisture and fabric saturation. Waterproof: This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Breathable: Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer.  Fabric and Technology Fabric: 100% Polyester / Woven / Dobby Standard fit: This garment is true to size for an easy, comfortable fit DRYVENT™: Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable

The North Face Mens Quest Mono Jacket

Features Mesh body lining Brushed-knit back-neck and chin guard lining Exposed centre front zip Three-piece hood with one-point regulation Two zipped hand pockets Adjustable hood and hem Elasticated cuffs Heat transfer logo Intended Use: Hiking Standard fit: This garment is true to size for an easy, comfortable fit. Other Features DWR - Water repellent: A durable water-repellent finish provides protection from light moisture and fabric saturation. Waterproof: This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Breathable: Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer.  Fabric and Technology Fabric: 100% Polyester / Woven / Dobby Standard fit: This garment is true to size for an easy, comfortable fit DRYVENT™: Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable

The North Face Mens Valley View Jacket

Features Attached, adjustable hood Centre front zip Vertical zipped chest pockets Secure-zip hand pockets Zipped underarm vents Internal hem adjuster Adjustable hook-and-loop cuffs Intended Use: Hiking Other Features Windproof: This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Breathable: Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer.  Recycled material: This product is made with recycled materials, which helps to reduce landfill waste and minimise its impact on nature. Waterproof: This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Standard fit: This garment is true to size for an easy, comfortable fit. Fabric and Construction Fabric - Body: 165 G/M², DryVent™ 3L—85% Recycled Polyester, 15% Nylon with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish Fabric - Hood, Collar & Draft Flap Lining: 111 G/M², DryVent™ 2L—100% Recycled Nylon with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish DRYVENT™: Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable.

Columbia Mens Inner Limits III Jacket

Features Omni-Tech™ fully seam sealed prevents moisture from seeping into every seam while using waterproof-breathable fabric, so you stay completely dry in the rain Crafted with 100% recycled polyester Mesh lined for breathability Drawcord-adjustable hood seals out the elements Chin guard prevents chafing Zippered hand pockets secure valuables Adjustable cuffs for a versatile fit Drawcord-adjustable hem seals out the elements Center Back Length: 29.0 in / 73.7 cm Uses: Hiking, Walking Active Fit: Body skimming fit with end-use mobility in mind Materials Shell: Omni-Tech™ Plain Weave 2L 100% Polyester  Lining: 100% Polyester PFAS-FREE DESIGN: This product was designed without any PFAS (Per- and Polyfluorinated Substances), also known as 'forever chemicals'. Instead, we use a DWR finish that allows your gear to repel water without harming the environment. 

The North Face Mens Fontanales Jacket

Features This jacket meets the water-resistance requirements of most races' mandatory kits Reverse coil zips at the front Bonded chest stow pocket Reflective details Intended Use: Running & training Other Features Recycled material: This product is made with recycled materials, which helps to reduce landfill waste and minimise its impact on nature. Reflective: Light reflection detailing helps you stay visible in low-light conditions. Packable: This piece can be packed into its own pocket to save space. Waterproof: This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Breathable: Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer.  Windproof: This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Fabric and Construction Fabric: 100% Recycled Polyester with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish / DryVent™ / Woven DRYVENT™: Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable.

Mountain Equipment Mens Raintower Jacket

Weight: 350gFeatures 2.5-layer DRILITE ® 40D fabric with PFAS-free DWR Mountain Hood is fully adjustable Alpine fit with articulated and pre-shaped sleeves Full length WR centre front zip with internal flap 2 large ventilated pockets with water resistant zips Underarm pit zips with internal flap Adjustable cuffs and dual tether hem drawcords Inner pocket Material and Construction Fabric: 40D - 85g / 2.5oz Content: 100% Polyamide, PU Membrane

Berghaus Mens RG Alpha 2.0 Jacket

Weight: 598gFeatures Berghaus Hydroshell® fabric is waterproof and breathable, with a storm flap for added protection. The adjustable rollaway hood provides extra weather protection in seconds when needed, and packs away neatly when not. Two lower zipped hand pockets are ideal for storing essentials. Fully adjustable back hem to keep out draughts. Hydrostatic Head - 12,250mm Breathability Rating - 5,063 (g/m2/24hrs) Fabric Fabric: 100% Polyamide / Solid Lining: 100% Polyamide / Mesh Lining: 100% Polyester

Haglofs Mens Front Proof II Jacket

Weight: 528gFeatures 3-layer PROOF™ Pro shell for durable and breathable weather resistance Two-way center front zipper Helmet-compatible hood: Two zippered hand pockets, backpack-compatible One zippered chest pocket One-way zippered ventilation Adjustable cuffs Asymmetrical bottom hem with adjustability Recommended for: Trekking & Hiking, Lifestyle Material and Construction Proof PRO 3L woven fabric, 75 Denier, 100% Recycled Polyester  Hydrostatic head: 20.000 mm  Moisture Permeability: 20.000 g/m2/24h  PFAS-free DWR, 157g/m2, bluesign® approved. Knitted brushed tricot, 100% Recycled Polyester, 130g/m2, bluesign® approved

Haglofs Mens Front Proof II Jacket

Weight: 550gFeatures Made out of 3-layer PROOF™ shell fabric for durable and breathable weather resistance Two zippered hand pockets Underarm ventilation Adjustable Hood Adjustable cuffs and bottom hem Recommended for: Trekking & Hiking Materials PROOF 3L, 100% Recycled Polyester, 75 Denier, Hydrostatic head: 15.000 mm; Moisture Permeability: 15.000 g/m2/24h, PFAS-free DWR, 159 g/m², bluesign® approved  

Haglofs Mens Breeze Proof Jacket

Weight: 623gFeatures Waterproof and breathable Adjustable full-coverage hood with brim Two zippered hand pockets Draw-cord adjustable bottom hem Velcro-adjustable cuffs Brushed chin guard Zipper placket Standard fit Recommended For: Lifestyle Materials PROOF 2L plain weave, 100% Recycled Polyester, 75 Denier, Hydrostatic head: 15.000 mm; Moisture Permeability: 15.000 g/m2/24h, PFAS-free DWR, 150g/m2, bluesign® approved, Knitted mesh, 100% Recycled Polyester, 70g/m2, Bluesign® approved., Knitted brushed tricot, 100% Recycled Polyester, 130g/m2, bluesign® approved, Tafetta woven fabric, 100% Recycled Polyester, 75 Denier, 83g/m², bluesign® approved  

Haglofs Mens Breeze Proof Jacket

Weight: 623gFeatures Waterproof and breathable Adjustable full-coverage hood with brim Two zippered hand pockets Draw-cord adjustable bottom hem Velcro-adjustable cuffs Brushed chin guard Zipper placket Standard fit Recommended For: Lifestyle Materials PROOF 2L plain weave, 100% Recycled Polyester, 75 Denier, Hydrostatic head: 15.000 mm; Moisture Permeability: 15.000 g/m2/24h, PFAS-free DWR, 150g/m2, bluesign® approved, Knitted mesh, 100% Recycled Polyester, 70g/m2, Bluesign® approved., Knitted brushed tricot, 100% Recycled Polyester, 130g/m2, bluesign® approved, Tafetta woven fabric, 100% Recycled Polyester, 75 Denier, 83g/m², bluesign® approved  

Ron Hill Mens Tech All Terrain Jacket

Features Made from recycled yarns Wind resistant Water resistant PFAS free fabric Lightweight Self-packable pocket with hand strap Secure pocket Key loop Roll away hood Venting tab Reflective Relaxed fit Fibre Composition 100% Recycled Polyamide  

The North Face Mens North Table Down Triclimate Jacket

Features Outer jacket: Waterproof, breathable, seam-sealed DryVent™ 2L shell with a non-PFC DWR finish helps keep you dry Outer jacket: Windproof fabric Outer jacket: Pit-zip venting Outer jacket: Secure-zip hand pockets and chest pocket Outer jacket: Exposed, water-repellent VISLON® centre front zip Outer jacket: Heat transfer logo on left chest and back-right shoulder Outer jacket: Attached, fully adjustable hood Inner jacket: 600-fill recycled waterfowl down in the body Inner jacket: Heatseeker™ Eco synthetic insulation in the collar, underarms and side panels is made with hollow-core fibres for warmth, performance and durability Inner jacket: Exposed, VISLON® centre front zip Inner jacket: Secure-zip hand pockets Inner jacket: Elastic cuffs Heat transfer logo on the left chest Outer and inner have Triclimate® loops and snaps for snap-in compatibility Fabric and Construction Dryvent™ - Heatseeker™ eco - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. - Heatseeker™ Eco synthetic insulation provides durable, lightweight and compressible warmth. Synthetic fill - Synthetic insulation maintains warmth even in damp conditions Down fill - Waterproof - Lofty down insulation maintains warmth in cold conditions Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Breathable - Air can easily pass through the fabric in this garment, helping to regulate body temperature. DWR finish - A durable water-repellent finish provides protection from light moisture and fabric saturation. Recycled material - Helps reduce landfill waste and the use of virgin materials.  

The North Face Mens Quest Jacket

Features Waterproof, breathable, seam-sealed fabric Mesh body lining Brushed knit back neck and chin guard lining Exposed centre front zip with a water-resistant finish Fixed hood with one-way hood regulation Two hand pockets with zip closure Shock cord regulation adjustment at the hood and hem Elasticated cuffs Heat transfer logo Durable water-repellent (DWR) finish Fabric: 2L DryVent™ Dobby–100% Polyester with Durable Water-Repellent (DWR) Finish  

The North Face Mens Quest Insulated Jacket

Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Breathable - Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Synthetic fill - Synthetic insulation maintains warmth even in damp conditions. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Designed to keep you warm and dry Waterproof, breathable, seam-sealed DryVent™ 2L shell Brushed knit back neck and chin guard lining Exposed centre front zip with a water-resistant finish Fixed hood with one-way hood regulation Two secure-zip hand pockets Shock cord regulation adjustment at the hem Elasticated cuffs Heat transfer logo Materials & Construction Fabric | 110 G/M², DryVent™ 2L–100% Polyester Insulation | 100% Polyester  

The North Face Mens Evolve II Triclimate Jacket

Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Triclimate® compatible - This product can be combined with other Triclimate®-compatible products for complete weather protection. DWR finish - A durable water-repellent finish provides protection from light moisture and fabric saturation. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Breathable - Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Recycled material - This product is made with recycled materials, which helps to reduce landfill waste and minimise its impact on nature. This three-in-one jacket offers waterproof, breathable protection with a DryVent™ 2L shell and a removable fleece liner Outer jacket: Waterproof, breathable, seam-sealed Brushed knit chin guard and collar lining Centre front closure with a zip and hook and loop Adjustable hood with a bonded brim stows in the collar Two secure-zip hand pockets Shock cord regulation adjustment at the hem Self-fabric cuffs with a hook and loop adjustment Embroidered logo  Durable water-repellent (DWR) finish  Inner jacket: Centre front zip  Two secure-zip hand pockets Elastic binding at the cuffs and hem Embroidered logo Materials & Construction Fabric - Outer Jacket | 111 G/M², 2L DryVent™–100% Polyester Fabric - Inner Jacket | 190 G/M², 100% Recycled Polyester Fleece  

The North Face Mens Carto Mono Triclimate Hooded Jacket

Features and Benefits Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Breathable - Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Synthetic fill - Synthetic insulation maintains warmth even in damp conditions. Circular design - This item is part of our Circular Design initiative – a collection designed to help regenerate natural systems by minimising waste and pollution. Triclimate® compatible - This product can be combined with other Triclimate®-compatible products for complete weather protection. Circular Design: thoughtfully designed to be disassembled and recycled by us at the end of its life into raw materials for a second generation of products Outer and inner have Triclimate® loops and snaps for snap-in compatibility Outer jacket: DryVent™ Mono delivers seam-sealed, waterproof protection in a mono-material construction that’s designed to be recycled by us and put back into the supply chain Outer jacket: Non-PFC DWR finish for added water repellency Outer jacket: Attached, adjustable hood with a cinch cord with cord locks in the front and back Outer jacket: Adjustable hook-and-loop cuff tabs Outer jacket: Embroidered logo on the left chest and back-right shoulder Inner jacket: Wind-resistant WINDWALL™ fabric Inner jacket: Non-PFC DWR finish for added water repellency Inner jacket: Heatseeker™ synthetic insulation is made with hollow-core fibres for added warmth, performance and durability Inner jacket: Secure-zip hand pockets Inner jacket: Embroidered logo on the left chest Fabric and Materials Fabric - Outer Body | 123 G/M², DryVent™ Mono 2L—100% Recycled Polyester with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish $$ Fabric - Outer & Inner Lining | 66 G/M², 100% Recycled Polyester Fabric - Outer Pocket Lining | 90 G/M², 100% Recycled Polyester $$ Fabric - Inner Body | 78 G/M², WindWall™—100% Recycled Polyester with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish $$ Inner Insulation | 100 g Heatseeker™—70% Post-Consumer Recycled Polyester $$ Centreback | 76,2 cm Technology Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Heatseeker™ - Synthetic Heatseeker™ insulation delivers exceptional warmth without the bulk. It is highly durable and compressible – ideal for packing into backpacks and luggage. Windwall™ - WindWall™ fabrics are engineered to reduce the effects of chilling winds while maintaining a good level of breathability.  

Craghoppers Mens Lorton Jacket

Features Wind Resistant: The fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Breathable: Lightweight fabrics that help regulate body temperature and keep you comfortable by allowing moisture to escape. Waterproof: Waterproof fabric provides a moisture barrier for guaranteed dryness. Stretch: Stretch fabric provides greater range of motion and ultimate comfort. Stretch AquaDry waterproof & breathable fabric with fully taped seams. Waterproof rating (hydrostatic head): 2 mm Breathability rating: 3 g/m2/24hrs H2OShield plant-based water repellent finish (fluorocarbon free) Zipped security & O/S map pocket to inner Adjustable hem Reflective logos for better visibility Articulated sleeves Technology AQUADRY: Guaranteed waterproof and breathable fabric. Designed for moderate to heavy downpours. 32" length Zipped YKK centre front with stud fastening outer stormflap & inner zip guard Dropped back hem with drawcord adjuster Grown on hood with drawcord adjusters to front & back and peak insert Cuff adjusters Recycled polyester stretch with AquaDry Membrane & H2OShield DWR, polyester stretch mesh & recycled polyester taffeta lining. Recycled zip tape to all but outer pockets. Fabric Main fabric: 100% recycled polyester / Membrane: TPU / Mesh: 100% polyester / Taffeta: 100% recycled polyester  

The North Face Mens Lightning Zip In Jacket

Weight: 510gFeatures: DRYVENT™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Discover more about DRYVENT™ Adjustable hood Adjustable hem with hidden stoppers Exposed pit zips for ventiliation VELCRO® tab at the cuffs Elbow-shaped seams Secure-zip hand pockets DryVent™ technology Heat transfer logo on the left chest and back-right shoulder Material and Construction: Fabric - Outer Shell : 133 G/M², 100% Polyester / Woven / Plain / DryVent™ Fabric - Lining : 66 G/M², 100% Polyester / Woven / Taffeta  

Mammut Mens Linard Guide HS Hooded Jacket

Weight: 437 gFeatures 3-layer Mammut DRY Tour laminate for dependable weather protection Lightweight, stretchable material for optimum comfort With PFC-free Durable Water Repellent (DWR) treatment 1-point adjustable hood Water-repellent front zipper 2 side pockets with water-repellent zippers Underarm zipper for optimum ventilation Pre-shaped sleeves with hook and loop fastener Hem width can be adjusted with drawstring Suitable for: Hiking Cut: Regular Fit Water column: 20000 mm Main material: (Denier)50Dx50D Breathability: 20.000 g/m²/24h Materials Main Material - Backing: 100% Polyester Insert - backing: 100% Polyester Insert: 100% Polyester (recycled) Lining: 100% Polyester (recycled) Lining: 2: 100% Polyester (recycled) Lining: 3: 100% Polyester Main materia: l00% Polyester (recycled) Membrane: Based on polyester

Berghaus Mens Deluge Pro 3.0 Jacket

Weight: 340g Features Waterproof - 2.5 layers of Hydroshell® laminated goodness. Breathable fabric let’s any sweat vapour out. With more than 75% recycled content and more than 90% bluesign® APPROVED fabric, this product meets our MADE KINDER criteria which helps ensure that our gear is more responsibly made. Two zip hand pockets so stuff doesn’t fall out.  Storm flaps over the zips to stop rain getting in. Elasticated cuffs and adjustable hem for a close fit. Materials FABRIC: 100% POLYESTER WITH POLYURETHANE MEMBRANE

The North Face Mens Quest Triclimate Jacket

Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. COMPATIBLE WITH OTHER GARMENTS - This product can be teamed with complementary products for complete weather protection. Breathable - Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Outer: waterproof and breathable with a zip-in midlayer, reinforced hood peak, 1 external zipped chest pocket, 2 zipped hand pockets. Inner: full-zip with kangaroo pocket Materials & Construction Fabric - Outer | DryVent™ 2L–100% Polyester / Woven / Zip-in System Fabric - Inner | 95% Polyester, 5% Elastane / Knit / Grid-Backed Fleece Centreback | 67,31 cm

The North Face Mens Millerton Insulated Jacket

Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Synthetic fill - Synthetic insulation maintains warmth even in damp conditions. Breathable - Air can easily pass through the fabric in this garment, helping to regulate body temperature. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Synthetic insulated version of our popular Millerton Jacket Adjustable hood with stiffened peak Aadjustable hem Internal chest pocket and hook-and-loop adjustable cuffs Bluesign approved Materials Fabric | DryVent™ 2L–100% Polyester / Woven Centreback | 76,2 cm 

The North Face Mens Antora Jacket

Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Breathable - Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. DWR finish - A durable water-repellent finish provides protection from light moisture and fabric saturation. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Recycled material - This product is made with recycled materials, which helps to reduce landfill waste and minimise its impact on nature. Waterproof, breathable, seam-sealed DryVent™ 2L shell with a non-PFC DWR finish helps keep you dry Windproof fabric Alpine-style design with secure-zip hand pockets Attached, adjustable, three-piece hood with a drawcord and cord locks Storm flap with a hook-and-loop closure covers the centre front zip Encased-elastic cuffs Internal cinch-cord with a cord lock at the hem for adjustability Heat transfer logo on the left chest and back-right shoulder Materials & Construction Fabric - Body | 111 G/M², DryVent™ 2L—100% Recycled Nylon  Ripstop with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish Fabric - Body Lining | 50 G/M², 100% Recycled Polyester Mesh Fabric - Hood, Sleeve & Pocket Lining | 66 G/M², 100% Recycled Polyester Taffeta Centreback | 73,66 cm

The North Face Mens Antora Jacket

Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Breathable - Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. DWR finish - A durable water-repellent finish provides protection from light moisture and fabric saturation. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Recycled material - This product is made with recycled materials, which helps to reduce landfill waste and minimise its impact on nature. Waterproof, breathable, seam-sealed DryVent™ 2L shell with a non-PFC DWR finish helps keep you dry Windproof fabric Alpine-style design with secure-zip hand pockets Attached, adjustable, three-piece hood with a drawcord and cord locks Storm flap with a hook-and-loop closure covers the centre front zip Encased-elastic cuffs Internal cinch-cord with a cord lock at the hem for adjustability Heat transfer logo on the left chest and back-right shoulder Materials & Construction Fabric - Body | 111 G/M², DryVent™ 2L—100% Recycled Nylon  Ripstop with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish Fabric - Body Lining | 50 G/M², 100% Recycled Polyester Mesh Fabric - Hood, Sleeve & Pocket Lining | 66 G/M², 100% Recycled Polyester Taffeta Centreback | 73,66 cm

Berghaus Mens RG Alpha 2.0 Jacket

Weight: 598g WATERPROOF GUARANTEE Our fully breathable and Waterproof Hydroshell® fabric keeps you dry and protected when the weather turns. The centre-front zip is covered for additional Waterproof protection. ADJUST YOUR SETUP Adjustable hood offers enhanced wet weather protection and can be neatly rolled away when not in use. ESSENTIALS IN REACH Keep your vital bits and pieces close at hand using the two hand-warmer pockets.

Regatta Mens Pack It Jacket III

Features Waterproof & Breathable - Protects from wet weather conditions, allowing moisture vapour to escape through fabric Taped Seams - Enhances the waterproof protection of clothing Packs Away - Product packs away into pocket/ bag for ease of carrying Waterproof and breathable Isolite 5000 lightweight polyamide fabric Breathability rating 5,000g/m²/24 hours Unlined Packs away into stuff sack Machine Washable Isolite: Lightweight waterproof, breathable and windproof fabric Materials 100% Polyamide

The North Face Mens Evolve II Triclimate Jacket

Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Triclimate® compatible - This product can be combined with other Triclimate®-compatible products for complete weather protection. DWR finish - A durable water-repellent finish provides protection from light moisture and fabric saturation. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Breathable - Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Recycled material - This product is made with recycled materials, which helps to reduce landfill waste and minimise its impact on nature. This three-in-one jacket offers waterproof, breathable protection with a DryVent™ 2L shell and a removable fleece liner Outer jacket: Waterproof, breathable, seam-sealed Brushed knit chin guard and collar lining Centre front closure with a zip and hook and loop Adjustable hood with a bonded brim stows in the collar Two secure-zip hand pockets Shock cord regulation adjustment at the hem Self-fabric cuffs with a hook and loop adjustment Embroidered logo  Durable water-repellent (DWR) finish  Inner jacket: Centre front zip  Two secure-zip hand pockets Elastic binding at the cuffs and hem Embroidered logo Materials & Construction Fabric - Outer Jacket | 111 G/M², 2L DryVent™–100% Polyester Fabric - Inner Jacket | 190 G/M², 100% Recycled Polyester Fleece

The North Face Mens Quest Jacket

Weight: 505g Fabric: 75D 110 g/m² 2L DryVent™ - 100% polyester Waterproof, breathable, seam sealed DryVent™ 2L Mesh body lining $$ Brushed knit back neck and chin guard lining Reverse-coil centre front zip with water resistant finish Fixed Hood, with one way hood regulation Two secure-zip covered hand pockets Shock cord regulation adjustment at hood and hem Elasticated cuffs Heat transfer logo Durable water-repellent (DWR) finish